i f(av) rectangular 200 a waveform v rrm 45 v i fsm @ tp = 5 s sine 16000 a v f @ 100apk, t j =125c 0.58 v (per leg) t j range - 55 to 175 c major ratings and characteristics characteristics values units description/ features the 201cnq.. center tap schottky rectifier module series has been optimized for low reverse leakage at high temperature. the proprietary barrier technology allows for reliable operation up to 175 c junction temperature. typical applications are in high current switching power supplies, converters, free- wheeling diodes, welding, and reverse battery protection. 175 c t j operation center tap module low forward voltage drop high frequency operation guard ring for enhanced ruggedness and long term reliability lead-free schottky rectifier 201cnq045pbf series 200 amp bulletin pd-21102 rev. a 11/06 base common cathode lug terminal anode 1 lug termina l anode 2 case styles to-244 www.vishay.com 1 document number: 94154
201cnq045pbf series bulletin pd-21102 rev. a 11/06 i f(av) max. average forward per device 200 a 50% duty cycle @ t c = 146 c, rectangular wave form current * see fig. 5 per leg 100 i fsm max. peak one cycle non-repetitive 16,000 5 s sine or 3s rect. pulse surge current (per leg) * see fig. 7 2000 10ms sine or 6ms rect. pulse e as non-repetitive avalanche energy 135 mj t j = 25 c, i as = 17 amps, l = 1 mh (per leg) i ar repetitive avalanche current 20 a current decaying linearly to zero in 1 sec (per leg) frequency limited by t j max. v a = 1.5 x v r typical absolute maximum ratings parameters 201cnq units conditions a (1) pulse width < 300 s, duty cycle <2% v fm max. forward voltage drop 0.67 v @ 100a (per leg) * see fig. 1 (1) 0.81 v @ 200a 0.58 v @ 100a 0.71 v @ 200a i rm max. reverse leakage current 10 ma t j = 25 c (per leg) * see fig. 2 (1) 90 ma t j = 125 c c t max. junction capacitance (per leg) 5200 pf v r = 5v dc (test signal range 100khz to 1mhz) 25c l s typical series inductance (per leg) 7.0 nh from top of terminal hole to mounting plane dv/dt max. voltage rate of change 10,000 v/ s (rated v r ) t j = 25 c t j = 125 c v r = rated v r parameters 201cnq units conditions electrical specifications following any rated load condition and with rated v rrm applied parameters min typ max units t j max. junction temperature range - 55 - 175 c t stg max. storage temperature range - 55 - 175 r thjc thermal resistance, junction to case per leg - - 0.38 c/w thermal resistance, junction to case per module - - 0.19 k/w r thcs thermal resistance, case to heatsink - 0.10 - wt weight - 68 (2.4) - g (oz) mounting torque 35.4 (4) - 53.1 (6) lbf*in mounting torque center hole 30 (3.4) - 40 (4.6) (nm) terminal torque 30 (3.4) - 44.2 (5) vertical pull - - 80 lbf.in 2 inch lever pull - - 35 thermal - mechanical characteristics part number 201cnq045pbf v r max. dc reverse voltage (v) v rwm max. working peak reverse voltage (v) voltage ratings 45 www.vishay.com 2 document number: 94154
201cnq045pbf series bulletin pd-21102 rev. a 11/06 fig. 2 - typical values of reverse current vs. reverse voltage (per leg) fig. 3 - typical junction capacitance vs. reverse voltage (per leg) fig. 4 - max. thermal impedance z thjc characteristics (per leg) fig. 1 - max. forward voltage drop characteristics (per leg) reverse voltage - v r (v) reverse current - i r (ma) t 1 , rectangular pulse duration (seconds) thermal impedance - z thjc (c/w) 1e-05 1e-04 1e-03 1e-02 1e-01 1e+00 1e+01 0.001 0.01 0.1 1 single pulse (thermal resistance) d = 0.20 d = 0.75 d = 0.50 d = 0.33 d = 0.25 forward voltage drop - v fm (v) instantaneous forward current - i f (a) junction capacitance - c t (pf) 1 10 100 1 000 0 0.2 0.4 0.6 0.8 1 1.2 t = 175?c t = 125?c t = 25?c j j j 0.001 0.01 0.1 1 10 100 1000 0 5 10 15 20 25 30 35 40 45 150?c 125?c 100?c 75?c 50?c 25?c tj = 175?c 1000 10000 0 1020304050 tj = 25?c reverse voltage - v r (v) www.vishay.com 3 document number: 94154
201cnq045pbf series bulletin pd-21102 rev. a 11/06 fig. 7 - max. non-repetitive surge current (per leg) fig. 5 - max. allowable case temperature vs. average forward current (per leg) fig. 8 - unclamped inductive test circuit fig. 6 - forward power loss characteristics (per leg) free- w heel diode 40hfl40s 02 c urrent monitor hig h- speed switch irfp460 l dut rg = 25 ohm vd = 25 volt + (2) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm @ (i f(av) / d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r @ v r1 = 80% rated v r average forward current - i f(av) (a) allowable case temperature (c) average forward current - i f(av) (a) average power loss (watts) 0 20 40 60 80 100 120 140 160 90 100 110 120 130 140 150 160 170 180 dc square wave (d=0.50) 80% rated vr applied see note (2) non -repetitive surge current - i fsm (a) 0 1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 0 25 50 75 100 125 150 dc d = 0.08 d = 0.17 d = 0.25 d = 0.33 d = 0.50 rms limit square wave pulse duration - t p (microsec) 10 100 1000 10000 1000 10000 www.vishay.com 4 document number: 94154
201cnq045pbf series bulletin pd-21102 rev. a 11/06 conforms to jedec outline to-244 dimensions in millimeters and (inches) outline table ordering information table device code 1 5 24 3 1 - average current rating (x 10) 2 - product silicon identification 3 - c = circuit configuration 4 - n = not isolated 5 - q = schottky rectifier diode 6 - voltage rating (045 = 45v) 7 - lead-free 20 1 c n q 045 pbf 6 7 www.vishay.com 5 document number: 94154
201cnq045pbf series bulletin pd-21102 rev. a 11/06 ir world headquarters: 233 kansas st., el segundo, california 90245, usa tel: (310) 252-7105 tac fax: (310) 252-7309 11/06 data and specifications subject to change without notice. this product has been designed and qualified for industrial level and lead-free. qualification standards can be found on ir's web site. www.vishay.com 6 document number: 94154
legal disclaimer notice vishay document number: 99901 www.vishay.com revision: 12-mar-07 1 notice the products described herein were acquired by vishay intertechnology, inc., as part of its acquisition of international rectifier?s power control systems (pcs) business, which closed in april 2007. specifications of the products displayed herein are pending review by vishay and are subject to the terms and conditions shown below. specifications of the products displayed herein are subject to change without notice. vishay intertechnology, inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. information contained herein is intended to provide a product description only. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. except as provided in vishay's terms and conditions of sale for such products, vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and /or use of vishay products including liab ility or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyrigh t, or other intellectual property right. the products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify vishay for any damages resulting from such improper use or sale. international rectifier ? , ir ? , the ir logo, hexfet ? , hexsense ? , hexdip ? , dol ? , intero ? , and powirtrain ? are registered trademarks of international rectifier corporation in the u.s. and other countries. all other product names noted herein may be trademarks of their respective owners.
|
